NetComm N3G002W - Manual (Page 25)

YML894 Rev1 N3G002W 3G Wireless Router User Guide N3G002W 3G Wireless Router User Guide
www.netcomm.com.au 2
Dynamic IP Address with Road Runner Session Management
This connection will get the IP address from the internet service provider. Choose this connection if you are
connecting the router to a Telstra Bigpond Cable modem.
• Account. Type in your Account username.
• Password. Type in your account password.
• Login Server (Optional). Type in the login server of the Roadrunner service.
• Auto Backup. Tick Enable to make the 3G connection as a backup connection.
PPP over Ethernet
Most ADSL service will use PPP over Ethernet protocol. Use this if you connect the router to a bridge ADSL modem.
• PPPoE Account/ PPPoE Password. Type in your account username and password.
• MTU. Leave as default unless instructed by your Internet Service Provider.
• Primary DNS/Secondary DNS. Primary DNS/Secondary DNS. Type in the DNS address assigned by your
Internet Service Provider. Optional.
• Maximum Idle Time. Enter the number of second you want to have elapsed without any activity before
your Internet connection terminates automatically. Set to 0 to disable.
• Auto-reconnect- Tick to enable auto reconnect function.
• PPPoE Service Name (Optional). Type in the PPPoE service name assigned by your Internet Service Provider.
• Assigned IP Address (Optional). Type in the IP address assigned by your Internet Service Provider.
• Auto Backup. Tick Enable to make the 3G connection a backup connection.