NEC 5224 - Manual (Page 26)

20
• To announce the Transfer, wait for an answer, consult, and hang up.
• To cancel the Transfer, press ( CANCEL ).
To transfer an active call during headset operation:
1. Press ( TRANS/CONF ).
2. Dial the number of the third party.
3. To complete the Transfer, press the Release feature key.
Conference
To form a Conference when a two–party call is already in place, or to add another party to an
existing Conference:
1. Press ( TRANS/CONF ).
2. Dial the number of the next party.
3. Wait for an answer.
4. Press ( TRANS/CONF ).
To leave a Conference:
• Hang up or press ( CANCEL ).
Conference Split
To Split a Conference and speak privately with the original party on a 5212 IP Phone (only):
1. Press ( TRANS/CONF ).
2. Dial *41.
To Split a Conference and speak privately with the original party on a 5224 IP Phone (only):
• Press the Split softkey.
Add Held (5224 IP Phone only)
To move a call on hold to another line appearance:
1. Press an available line key.
2. Press the AddHeld softkey.
3. Press the flashing line key.