NEC 5224 - Manual (Page 21)

15
To store a Speed Call number:
1. Press ( SUPERKEY ).
2. Press # or the No softkey until "Personal Keys?" appears.
3. Press * or the Yes softkey.
4. Press a personal key that isn't a line key.
5. Press * or the Change softkey
6. On a 5224 IP Phone only, press the Yes softkey.
7. Do one of the following:
• To enter a new number, dial the number (press
( HOLD ) between digits to
create a one–second pause during dialing; press ( HOLD ) more than once
to lengthen the pause.)
• To enter a trunk flash, press
( TRANS/CONF ). (See "Trunk Flash" for
more information about the use of this feature.)
• To enter the last number dialed, press
( REDIAL ).
8. On a 5212 IP Phone only, press the personal key again.
9. Do one of the following:
• To make the number private, press * or the Priv softkey
• To keep the number visible, press # or the Save softkey.
10. Press ( SUPERKEY ).
Speed Call – Personal
To dial a stored personal Speed Call number:
1. Lift the handset.
2. Dial *58.
3. Enter an index number between 00 and 09.
To store a personal Speed Call number:
1. Lift the handset.
2. Dial *67.