NEC NLT-32HD1 - Manual (Page 29)

29
EN
Sound Menu
Language selection for dual language broadcast
If a programme received in two languages (dual language), you can
switch to
DUAL I , DUAL II or DUAL I+II by pressing the I/II button
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loudspeakers.
DUAL I+II sends a separate language to each loudspeaker.
If your set is equipped with the receiver for NICAM reception, the high
quality NICAM (Near Instantaneous Companding Audio Multiplex) digital
sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
When NICAM mono is received, you can select NICAM MONO or FM
MONO.
When NICAM stereo is received, you can select NICAM STEREO or FM
MONO. If the stereo signal is weak, switch to FM mono.
When NICAM dual is received, you can select NICAM DUAL I , NICAM
DUAL II or NICAM DUAL I+II or MONO . When FM mono is selected
the display MONO appears on the screen.
Mono sound selection
In stereo reception if the stereo signal is
weak, you can switch to mono by pressing
the I/II button twice. In mono reception the
depth of sound is improved. To switch back
to stereo, press the I/II button twice again.
In AV mode, you can select output sound for
the left and right loudspeakers.
Repeatedly press the I/II button to select the
sound output.
L+R :Audio signal from audio L input is sent
to left loud-speaker and audio signal from
audio R input is sent to right loudspeaker.
L+L : Audio signal from audio L input is sent
to left and right loudspeakers.
R+R : Audio signal from audio R input is
sent to left and right loud-speakers.
4 4
Stereo/Dual/NICAM reception