New Holland H6730 - Manual (Page 2)

New Holland H6830 Heavy-duty Pull-type
Disc Mower Specifications
H6830
Page 2of 3
MODEL H6830
CUTTER BAR
Cutting width, ft. in. (m)
10’ 4” (3160)
Cutting height, in. (m) 0.95-3.2 (24-81)
Cutter bar tilt angle, degrees -2 to -10
Type cutterbar Modular, w/individual sealed reservoirs
Number of discs/knives per disc 8/2
Disc speed @ rated PTO speed, rpm 2,835
Cutterbar drivetrain protection Std.-frangible splines in disc drive hub
Cutter bar floatation Vertical and lateral, adjustable springs
Swath width, less shields, in. (m) 95 (2.4)
DRIVELINE
Input speed, RPM
540
Driveline protection Slip clutch and overrunning clutch assembly
@ rear of PTO shaft
TRACTOR REQUIREMENTS
Minimum PTO horsepower required, hp (kW)
60 (45)
Hydraulic circuits required 2
Minimum relief pressure required, psi (bar) 1,500 (103)
Drawbar/3 pt. hitch requirements ASAE category II drawbar
TIRES
Tubeless ag rib implement tires
27x9.5-15 6PR
TRANSPORT SPEED, MAXIMUM, mph (k/h) 20 (32.19)
DIMENSIONS AND WEIGHT
Width, transport, ft. in. (m)
10’ 10” (3.3)
Width, operating, ft. in. (m) 16’ 4” (4.9)
Length, transport, ft. in. (m) 15’ 8” (4.8)
Length, operating, ft. in. (m) 15’ 3” (4.6)
Height, transport, in. (m) 62 (1.6)
Height, operating, in. (m) 62 (1.6)
Ground clearance w/head fully raised, in. (mm) 11 (279)
Weight, operating, lb. (kg) 2,610 (1186)