Nokia XPRESSMUSIC 5800 - Manual (Page 76)

Do not pair with or accept connection requests from an
unknown device. This helps to protect your device from
harmful content.
Send data using Bluetooth connectivity
Several Bluetooth connections can be active at a time. For
example, if you are connected to a compatible headset, you
can also transfer files to another compatible device at the
same time.
1. Open the application where the item you want to send is
stored. For example, to send an image to another
compatible device, select Gallery > Images & videos .
2. Tap an item, and select Options > Send > Via
Bluetooth .
Devices with Bluetooth wireless technology that are
within range are displayed. Device icons are as follows:
computer
phone
audio or video device
other device
To interrupt the search, select Stop .
3. Select the device with which you want to connect.
4. If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter a
passcode. The same passcode must be entered in both
devices.
When the connection is established, Sending data is
displayed.
Tip: When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter *#2820#.
Pair devices
Select Menu > Settings and Connectivity > Bluetooth .
To pair with compatible devices and view your paired
devices, open the Paired devices tab.
Before pairing, create your own passcode (1 to 16 digits), and
agree with the owner of the other device to use the same
code. Devices that do not have a user interface have a factory-
set passcode. The passcode is used only once.
1. To pair with a device, select
Options > New paired
device . Devices that are within range are displayed.
2. Select the device, and enter the passcode. The same
passcode must be entered on the other device, as well.
3. Some audio accessories connect automatically to your
device after pairing. Otherwise, to connect to an
accessory, select Options > Connect to audio device .
Paired devices are indicated by in the device search.
To set a device as authorised or unauthorised, select from the
following:
●
Set as authorised — Connections between your device
and the authorised device can be made without your
knowledge. You will not be asked for authorisation or
acceptance separately. Use this status only for your own
Connectivity
© 2009 Nokia. All rights reserved. 76