Nuvo NV-E6DMS - Manual (Page 13)

13
II. Installing the Essentia Amplifier
System setup works best when the amplifier is placed
in the same location as the audio source equipment.
This is typically in an audio rack, entertainment center
or a closet dedicated to housing the home audio/video
equipment.
The amplifier should be plugged in and the power but-
ton on the front panel should be depressed before pro-
ceeding with the rest of the installation. This activates
the internal protective circuitry of the Essentia
System.
III. Installing the NV-E6DEZP EZ
Port (Fig. 2)
The EZ Port is a multi-connection hub designed to
accept all the Cat-5 wires from the keypads in the sys-
tem. The location of the EZ Port should be determined
by the location of the Essentia amplifier. It is best to
place in the wall behind the amplifier that would be
easily accessible if necessary.
The EZ Port fits easily in any dual-gang size construc-
tion bracket with an open back. These are often
referred to as "mud rings". Simply plug the terminated
Cat-5 wires into any of the sixteen available jacks on
the back of the EZ Port. The order in which the individ-
ual Cat-5 wires is plugged in not important, although it
is strongly recommended that you label the Cat-5 with
the appropriate zone number for future reference.
Once you have plugged the Cat-5 wires into the EZ
Port, screw the EZ Port into its construction bracket
using the supplied mounting screws.
Fig. 2