Pioneer PureVision PDP 5040HD - Manual (Page 62)

10 Electronic Program Guide (EPG) (for DTV Only)
62
En
Setting the timer manually
Using the menu, you can also preset digital TV pro-
grams by specifying their scheduled date and time.
1 Press HOME MENU.
2 Press / to select “Rec/View Timer”, and then
press ENTER.
• The schedule table appears.
3 Press / to select a list number, then press .
• You can select any desired list number.
4 Press / to specify a date, and then press .
5 Press / to specify the start hour, and then press
.
6 Press / to specify the start minute, and then
press .
7 Press / to specify the end hour, and then press
.
8 Press / to specify the end minute, and then
press .
9 Press / to specify a channel number, and then
press .
10 Press / to select “VIEW”, “ANALOG” or a D-
VHS recorder, and then press ENTER.
• Select “VIEW” when presetting the program for
auto channel select. Select “ANALOG” when
presetting it for recording via a VCR controller.
Select a D-VHS recorder when presetting it for
recording with a D-VHS recorder.
• In the Info field, “View OK” appears when
presetting for auto channel select is accepted,
and “Rec OK” appears when presetting for
recording is accepted.
11 If presetting another program, press / to select
another list number, and then repeat steps 4 to 6.
• You can preset up to 28 programs.
12 Press HOME MENU to exit the menu.
• If the schedule of the selected program is overlapped
with another presetting, “Overlapped” appears in the
Info field. Presettigs with “Overlapped” may not be
partially or entirely executed.
• When entering into the schedule table, pressing
ENTER causes the cursor to jump to an empty field.
• Presetting becomes ineffective if the start time and
the end time are identical or if presetting operations
are performed within two minutes before the start of
the program.
• Presettings made using the EPG are automatically
shown in the schedule table.
• For presetting made using the EPG, “E” appears
beside the channel number in the schedule table. If
you alter the presetting content, “E” disappears.
• For priorities about overlapped presettings, see
“Priority rules for overlapped presettings” on page 63.
• If you switch off the system using the POWER
button, the program presetting will become
ineffective. Be careful not to switch off the power.
PDP5040HD-Eng (56-64) 7/24/03, 2:00 PM 62