Panduit PTR3E User Manual
Page 37
If the printer has print job(s) in memory, selecting
YES will cause the job(s) to be cleared. The default
selection is number Be sure you want to cancel the
print job(s) before selecting yes as the job(s) cannot
be recovered and will have to be retransmitted to
the printer.
1.
Use the LINE key to step the underline
cursor to either the YES or NO selection.
2.
Once the correct setting is underlined,
pressing the FEED key will accept the
setting.
3.
After the print job(s) have been cleared from
memory, the printer will display a
COMPLETED message for 3 seconds and
then return to the initial ONLINE Normal
Mode.
4.
If you wish to change any of the settings, you
must enter the User Settings mode again by
taking the printer OFFLINE and pressing
the LINE and FEED keys.
ADVANCED MODE
An Advanced Mode is provided to make adjustments that require only occasional
changes. Since they affect the basic operation of the printer, the procedure for
entering this mode is designed to prevent someone from accidentally changing
the settings.
The Advanced Mode is entered by pressing the LINE
key while simultaneously turning power on. The
printer will emit one long beep after which the LINE
key is released. Pressing the FEED key will step the
display to the first selection.
This setting determines if a zero is printed with a
slash or without a slash. This setting can also be
controlled via software commands. When YES is
selected, the printer internal fonts will have a slash
through the center of the zero character.
1. Use the LINE key to step the underline cursor to
either the YES or NO selection.
2. Once the correct setting is underlined, pressing
the FEED key will accept the setting and
advance the display to the Auto Online display.
This setting determines the mode in which the printer
powers up. If the YES selection is made, the printer
powers up in the ON LINE mode and is ready to print.
If NO is selected, the printer powers up in the OFF LINE
mode and must be manually placed in the ON LINE
mode by pressing the LINE key before it is ready to print.
1.
Use the LINE key to step the underline to either
the YES or NO selection.
29
Section 3. Configuration
YES
NO
CANCEL PRINT JOB
COMPLETED
CANCEL PRINT JOB
ADVANCED MODE
ZERO SLASH
YES
NO
INITIALIZING
ROM V00.00.00.00
AUTO ONLINE
YES
NO