Panasonic PT-LB75U - Manual (Page 34)

E
NGLISH - 34
Settings
OPTION menu
When you change the input method, the guidance
appears in the upper right corner of the screen. The
following display methods are available. Press I H to
cycle through the options.
You can switch the logo on/off that is displayed when
starting up the projector. Press I H to select the
required option. STARTUP LOGO will be displayed for
30 seconds.
ON Active
USER Display the original text
OFF Deactive
Q Editing the original text
If you select USER, you can display a 2 lines of
original text which contains up to 40 characters in
each.
1. Select USER and press the ENTER button.
2. Select the required line to enter or edit the original
text, and press the ENTER button.
3. Use F G I H to specify the location of the
required character and press the ENTER button.
The selected character will be displayed in the box.
4. Repeat the step 3 until you finish the text to display
in a line.
To delete all the entered characters, move the cursor
to ALL DELETE and press the ENTER button.
To insert a character in the entered text line, move
the cursor to the text box to select the required place,
and press G and return to the character field.
To delete a character, press the DEFAULT button or
move the cursor to the required character then press
the DEFAULT button.
5. Select OK and press the ENTER button to set the
entered text in a box.
Press G and edit the TEXT2 if you need to, and
repeat the step 3 - 5.
Select CANCEL or press the MENU/RETURN button
to return to the previous menu without setting.
You can switch the function of the COMPUTER2 IN/
1 OUT terminal.
INPUT COMPUTER2 IN
OUTPUT COMPUTER1 OUT
The projector will detect the signal from the
COMPUTER1 IN or COMPUTER2 IN/1 OUT terminal if
the signal is RGB or YP
B P R . You can turn off the
automatic system and switch the settings manually.
AUTO Automatic adjustment
RGB For RGB signals
YP B P R For YP B P R signals
When projecting WIDE signals, switch to ON to display
the image in well adjusted size.
OFF For 4:3 signals
ON For WIDE signals
(16:9, 16:10 and 15:9)
INPUT GUIDE
Options Function
DETAILED
Display the input method by graphic. The
INPUT GUIDE will go out after
10 seconds without any operation.
If you select any of the COMPUTER
terminals which has no signal, the
computer connection guidance will be
displayed. See “Computer connection
guidance” on page 46.
SIMPLE
Display the input method by text. The
INPUT GUIDE will go out after
5 seconds without any operation.
OFF Turn off the guidance.
STARTUP LOGO
MENU RETURN
Remote control Control panel
See “Navigating through the MENU” on page 27.
See “Main menu and Sub-menu” on page 28.
OK CANCEL
ALL DELETE
SPACE
TEXT CHANGE
COMPUTER2 SELECT
RGB/YP
B
P
R
NOTE:
• Available with VGA60, 480i, 576i, 480p,
576p,1 125 (1 080)/60i, 1 125 (1 080)/50i, 720/60p,
720/50p only.
• When the input signal is not selected correctly with
AUTO setting, select RGB or YP B P R manually.
WIDE MODE