Switching the input signal, Capturing an image, Stopping the projection temporary – Panasonic PT-LB75U User Manual
Page 24: Resetting to the factory default settings, Nglish - 24, Remote control operation
B
asi
c Op
eration
Remote control operation
E
NGLISH - 24
You can switch the input method manually by
pressing the COMPUTER, WIRELESS
(PT-LB80NTU/PT-LB75NTU only) and
VIDEO buttons. Press the required button
several times or I H to cycle through the
input methods as follows.
You can confirm the selected input method in displayed
graphical input guide on the upper right of the screen.
Highlighted in yellow is selected terminal. See “INPUT
GUIDE” on page 34.
Q
Pressing the COMPUTER button
Q
Pressing the WIRELESS button
The WIRELESS button is only for PT-LB80NTU/
PT-LB75NTU.
See CD-ROM contents for more detailed information.
Q
Pressing the VIDEO button
Q
Pressing the INPUT SELECT button on
the projector
Press the FREEZE button to capture the image
and you can see it as a still picture. While the
image is frozen, the audio sound through the
projector will stop. Press the FREEZE button again to
escape and return to the continuing image.
You can stop the projection and audio sound
through the projector temporarily for saving
electrical power. Press the AV MUTE button again to
escape.
You can reset most of the customized settings
to the factory defaults by pressing the
DEFAULT button of the remote control. Display
the required sub menu or the menu items and press the
DEFAULT button again.
See “Main menu and Sub-menu” on page 28.
Switching the input signal
COMPUTER1
COMPUTER2
NOTE:
• Only when the COMPUTER2 SELECT is set to INPUT,
you can switch between COMPUTER1 and
COMPUTER2.
• With no signals from COMPUTER terminals, the
computer connecting guidance will be displayed. See
“Computer connection guidance” on page 46.
VIDEO
S-VIDEO
COMPUTER2
COMPUTER1
S-VIDEO
WIRELESS
*1
*1. WIRELESS is only for PT-LB80NTU/PT-LB75NTU.
VIDEO
NOTE:
• Switched signal may be displayed after a short interval.
• If you select an unplugged input method, the input guidance will blink on and off several times.
• See “List of compatible signals” on page 44.
• See “Connections” on page 17.
Capturing an image
Stopping the projection temporary
Resetting to the factory default settings
NOTE:
• Some menu items are not available to reset by pressing
the DEFAULT button. Adjust each menu items
manually.
• To reset all the settings to the factory defaults, see