Polycom DOC2559C - Manual (Page 40)

Chapter 1- Hardware Description
1-34
Fabric Switch
Module (FSM
4000) ERR Red ON - Major error on card.
Flashes - During card startup.
RDY Green ON - The card has completed
startup successfully.
Flashes - During card startup.
ACT Amber ON - At least one participant is
connected to a conference.
Flashes - During card startup.
MPM+/MPMx
Card ERR Red ON - Major error on card.
Flashes - During card startup.
RDY Green ON - The card has completed
startup successfully, after the ERR,
RDY & ACT LED’s have stopped
flashing.
Flashes - During card startup.
ACT Amber ON - At least one participant is
connected to a conference.
Flashes - During card startup.
HS Blue Flashes - Shut down process
initiated by lightly pulling the CPU
ejector levers. This LED flashes in
synchronization with the CNTL
4000’s card’s HS LED.
ON - Card is in a power down
mode.
Card removal Initiated - The card
can be removed safely once the
CPU ejector levers are fully open.
Card Insertion Initiated - If during
the startup phase the blue HS LED
remains lit, please ensure that the
card is properly seated in the
chassis. If this problem persists,
contact your next level of support.
Table 1-12 RMX 4000 Front Panel LED’s (Continued)
Component LED ID LED Color Description