17 [ddns] command – Planet Technology VIP-150T User Manual
Page 43
PLANET VIP-150T User’s Manual
40
4.17 [ddns] command
1.
-print:
display DDNS overall information and configuration.
2. -enable: to enable/disable DDNS function
.
(ddns
–enable 0/1, 0 for disable and 1
for enable).
3. -server: to set IP address of DDNS login server.
4. -hostname:
to set the registered Domain Name of VIP-150T. (ex.
ddns
–test.ddns.org)
5.
-id
:
to set login ID of registered account to log in DDNS server.
6.
-passwd:
to set password of registered account to log in DDNS server.
7.
-checkip
:
to enable/disable check IP function. If VIP-150T is behind IP sharing,
when this function is enabled, VIP-150T will check it
’s public IP address by asking
IP address check server and send to DDNS server to update DDNS data. If this
function is disabled, when VIP-150T is behind IP sharing, it will send it
’s private IP
address to DDNS server.
8.
-checkipsrv:
to set IP address of IP address check server.
9. -delay: to
set the update interval time. VIP-150T will re-update it
’s IP address in this
time. (ddns
–delay 1-59m/1-24h
,
m means minute, h means hour)
10. -force:
to force to execute DDNS update. Once user enter this command ,
VIP-150T will update DDNS data immediately
.
(ddns
–force “IP address of
VIP-150T
”)