System configuration – Planet Technology VIP-150T User Manual

Page 24

PLANET VIP-150T User’s Manual

3. System Configuration

Please refer to chapter 4.12 [sysconf] command

Keypad DTMF Type:

set DTMF type. User can select DTMF type VIP-150T

transmits.

RFC2833 Payload Type:

change RFC2833 Payload type. This is for special request

from the other site, if RFC2833 payload type of 2 sites are different, it may cause

some problem of connection.

Interval between Dialstring Digits:

Set the DTMF inter digit time (second)

To set the duration (in second) of two pressed digits in dial mode as timed out. If

after the duration user hasn

’t pressed next number, VIP-150T will dial out all

number pressed.

Terminal Digit:

select end of dialing key, e.g. set end of dial key as # button, after

finished pressing dialing number then press # will dial out.