Planet Technology VIP-150T - Manual (Page 22)

PLANET VIP-150T User’s Manual 19
2. SIP Configurations
Please refer to chapter 4.13 [sip] command
- Operation Mode: Select VIP-150T to work under Peer-to-Peer mode or Proxy
mode.
- Proxy Server: Set Proxy Server or URL address (Domain Name Server must be
configured. Please refer to Network Interface).
- Outbound Proxy: Set IP Address or URL address (Domain Name Server must be
configured. Please refer to Network Configure) of outbound Proxy server.
- Proxy port: Set Proxy port for VIP-150T to send message, default value is 5060, if
there is no special request of Proxy server, please don
’t change this value.
- Phone Book Search: enable/disable phone book search function. If user enabled
this function, VIP-150T will search dialed number in phone book to see if there is
any matched table before send to Proxy server, and if there is a matched data in
phone book, VIP-150T will make call to related IP address.
1. Prefix String: set prefix string. If user ID contains alphabets, user can set it as prefix
string here. For example, if Account Name is 123, VIP-150T will sent out messages
as Account Name @
”IP address of Proxy”, if user set prefix as abc, VIP-150T will
set out as abc123@
”IP address of Proxy”. This function is for special proxy server.