Polaris 340 Edge - Manual (Page 66)

64
PRE-RIDE INSPECTIONS
Start the Engine and Check
n
Transmission: Make sure the reverse is not engaged before
starting your machine.
n
Engine Stop Switch: Check the auxiliary shut-off switch for
proper operation. Push down to stop the engine. Pull up to release
and start the engine.
n
Tether Switch: If your machine has a tether switch, make sure the
engine shuts off when the tether is removed from the switch.
n
Lighting Check: Check the headlight (high and low beam),
taillight, and brake light for normal operation.
n
Mirror Adjustment: If equipped, adjust your mirrors so they can
be used to their full advantage.
n
Check Surroundings to Verify Clear Operating Area
Make sure you have a clear area all around your snowmobile, including
an area clear of bystanders. There’s always the possibility of some
sideways vehicle movement, of applying a little more throttle than
intended, or of debris being thrown by the track. If the surrounding
area is clear you before you start, you can devote your full attention to
operating the snowmobile.