Polaris 340 Edge - Manual (Page 115)

113
MAINTENANCE
General Maintenance
Taillight/Brakelight Replacement
To replace a bulb on most Edge models, remove the taillight lens
screws and remove the lens to access the bulbs.
On models with the adjustable seat bucket:
1. Remove the two sets of
fasteners (1) at the rear
corners of the seat base.
2. Tilt the rear of the seat
upward to access the bulbs
from under the seat.
3. Twist the bulb socket slightly
and pull it from the assembly.
4. Replace the bulb and reinstall
the socket into the assembly.
5. Lower the seat and reinstall the fasteners.
6. Test the taillight and brakelights for proper operation.
1