Connecting a decoder or additional equipment, Allocating a decoder, Manual tv channel search – Pioneer VR805/07 User Manual

Page 5

Repeat steps

until all TV channels have been

allocated.

To finish, press the

button.

Connecting a decoder or additional
equipment

You can also connect additional equipment to the

AV2 EXT2

socket. For instance: decoder, satellite receiver or camera
recorder.
You can connect a HIFI-stereo set to the sockets

AUX OUT L R

(audio output left/right) and

AUX IN L R

(audio in-

put left/right).

Allocating a decoder

With this function, the connected decoder will automatically
be activated for the TV programme required.

D With ’Connecting with scart cable and ’Easy Link/NexT-

View’ the decoder must be activated for the TV set.

Switch on the TV set. If required, select the programme
number for the video recorder.

On the video recorder, select the TV programme you wish
to link with the decoder function, using the

P ;

P =

button or the digit buttons

0-9

Press the

button. The main menu appears.

Select the line ’INSTALLATION’ with the menu buttons

P =

P ;

and confirm with the

button.

Select the line ’MANUAL SEARCH’ with the menu buttons

P =

P ;

and confirm with the

button.

Select the line ’DECODER’ with the menu buttons

P =

P ;

Select function ’ON’ with the menu buttons

When you select ’OFF’, the function will be switched off.

Confirm with the

button.

D When the function is switched on, ’DEC’ appears in the

display.

To end, press the

button.

Manual TV Channel Search

In certain cases the ’Automatic TV Channel Search’ may not
be able to find all of the TV channels (e.g. coded TV channels).
In that case, use this manual method to set the channels.

D With ’Connecting with scart cable and ’Easy Link/NexT-

View’ the videorecorder automatically loads the TV
channels from the TV set. Hence, some lines are not
functional.

Switch on the TV set. If required, select the programme
number for the video recorder.

Press the

button. The main menu appears.

Select the line ’INSTALLATION’ with the menu buttons

P =

P ;

and confirm with the menu button

Select the line ’MANUAL SEARCH’ with the menu buttons

P =

P ;

and confirm with the menu button

INSTALLATION

MANUAL SEARCH

CHANNEL/FREQ.

ENTRY/SEARCH

PROGRAMME NUMBER

| 02

}

{

TV CHANNEL NAME

MTV

DECODER

OFF

TV SYSTEM

PAL

NICAM

FINE TUNING

________________________________

TO EXIT
PRESS

MENU

In the line ’CHANNEL/FREQ.’, select the display for:
’FREQ.’: frequency
’CH’: channel
’S-CH’: special channel

If you know the frequency or channel of the desired TV
channel, you can enter the data in line ’ENTRY/SEARCH’
with the digit buttons

0-9