Pioneer VR805/07 - Manual (Page 4)

Autoinstall
The video recorder will search for all TV channels. It stores TV
channels found in the following sequence: BBC 1, BBC 2, ITV,
CH 4, CH 5, SKY, others.
Initial Installation
a If the aerial (antenna) has been connected to the video
recorder, press the
OK button. Please continue with the
next paragraph at step e .
Successive Installation
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’INSTALLATION’ with the menu buttons
P = or P ; and confirm with the P button.
d Select the line ’AUTOINSTALL’ with the menu buttons
P = or P ; and confirm with the P button.
e ’AUTOINSTALL’ starts. This can take several minutes.
INSTALLATION
AUTOINSTALL
SEARCHING FOR TV CHANNELS
03 CHANNELS FOUND
________________________
f When ’AUTOINSTALL’ is complete, ’AUTOINSTALL
COMPLETE’ will appear on the TV screen.
g To end, press the MENU button.
Automatic TV Channel Allocation (FOLLOW
TV)
With this function the video recorder maintains the same
channel sequence as on the TV set, in case you connected
your videorecorder to a TV set without scart cable. This only
functions if the video recorder (socket
AV1 EXT1 ) and the TV
set are connected with a scart cable. Additional equipment
connected to socket
AV2 EXT2 must be switched off.
D With ’Connecting with scart cable and ’Easy Link/NexT-
View’, this function will start the data transfer.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’INSTALLATION’ with the menu buttons
P = or P ; and confirm with the P button.
d Select the line ’FOLLOW TV’ with the menu buttons P =
or P ; and confirm with the P button. Take notice of
the message on the TV screen.
e Press the OK button.
If the video recorder recognizes that the TV set has been
connected with a scart cable, ’TV’ 01’ appears in the
display.
E When ’NOTV’ (no signal from TV set) appears in the
display, the TV channels can not be allocated automati-
cally. In this case, read paragraph: ’Manual TV Channel
Number Allocation’.
f Select programme number ’1’ on the TV set.
g Confirm with the OK button on the video recorder-re-
mote control. The video recorder compares the TV
channels on the TV set and the video recorder.
If the video recorder found the same TV channel as the
TV set, then it stores it at ’P01’.
h Wait until e.g.: ’TV’ 02’ appears.
i Select the next programme number, e.g.: ’2’ on the TV set.
j Confirm with the OK button on the video recorder-re-
mote control.
D If you allocated the wrong TV channeL, you can go back
one step with the menu button Q .
4