Starting synchro-edit, Setting the ’preroll time – Pioneer VR805/07 User Manual
Page 20
f
Switch the camera recorder to ’still picture’ (playback-
pause).
g
Confirm with the menu button
P
. The video recorder
now controls the connected camera recorder type.
h
The following message appears on the TV screen:
’VCR CONTROL DETECTED’ when the video recorder
controls the camera recorder or ’CAMERA CONTROL
DETECTED’ when the camera recorder controls the video
recorder.
Starting synchro-edit
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the
MENU
button. The main menu appears.
c
Select the line ’RECORD FUNCTIONS’ with the menu
buttons
P =
or
P ;
and confirm with the
P
button.
d
Select the line ’SYNCHRO EDIT’ with the menu buttons
P =
or
P ;
and confirm with the
P
button.
e
The OSD corresponding to the connected camera re-
corder type appears on the TV screen.
f
Search the beginning of the recording on the video
recorder.
g
Press the
STILL R
button. ’STILL’ appears on the TV
screen.
h
Use the
SELECT
button to select the OSD for the camera
recorder.
i
Search the beginning of the recording on the camera
recorder.
Switch the camera recorder to ’still picture’ (playback-
Pause).
The way copying is started depends on the camera recorder
type used:
Variant 1 when the video recorder controls the camera
recorder, or
Variant 2 when the camera recorder controls the video
recorder.
Variant 1, the video recorder is to control
the camera recorder
a
Start copying with the
RECORD/OTR n
button on the video
recorder.
The camera recorder starts ’PLAYBACK’ and at the same
time the video recorder starts ’RECORDING’.
b
Stop copying with the
STOP h
button on the video re-
corder.
c
End copying with the
MENU
button.
Variant 2, the camera recorder is to control
the video recorder
a
Start copying with the corresponding button on the
camera recorder.
The camera recorder starts ’PLAYBACK’ and at the same
time the video recorder starts ’RECORDING’.
b
Stop copying with the PAUSE or STILL button on the
camera recorder.
c
End copying with the
MENU
button.
Setting the ’preroll time’
When the beginning of the recording is missing, the ’preroll
time’ was too long. Select a shorter ’preroll time’.
If recording started too early, the ’preroll time’ was too short.
Select a longer ’preroll time’. You can select a ’preroll time’
between 1:00 and 5:00 seconds.
a
Press the
MENU
button.
b
Select the line ’RECORD FUNCTIONS’ with the menu
buttons
P =
or
P ;
and confirm with the menu button
P
.
c
Select the line ’RECORD SETTINGS’ with the menu
buttons
P =
or
P ;
and confirm with the menu button
P
.
d
In line ’PREROLL TIME’, adjust the ’preroll time’ with the
menu buttons
P
or
Q
.
D You can also directly enter the ’preroll time’ with the digit
buttons
0-9
.
D With the
CLEAR (CL)
button you can reset the ’preroll time’
to that of the identified camera recorder type.
e
Confirm with the
OK
buton.
f
To end, press the
MENU
button.
20