Pioneer VR805/07 - Manual (Page 13)

i Please note that you inserted a cassette without erase
protection. Switch off with the
STANDBY m button.
The programmed recording will only function when the
video recorder is switched off with the
STANDBY m but-
ton.
D If one or more of the TIMER blocks are occupied, ’
k ’
lights up in the display.
D If the end of the cassette is reached during a recording,
the cassette will automatically be ejected.
D If you forget to load a cassette, ’NO CASSETTE’ appears
on the TV screen and ’ k ’ lights up in the display.
D If you inserted a cassette with erase protection when you
want to start a recording, the cassette will be ejected.
D Programme numbers ’E1’ and ’E2’ are provided for
external recordings (via scart socket AV1 EXT1 or
AV2 EXT2 ).
D Programme number ’AUX’ is provided for audio record-
ings via sockets AUX IN L R .
Manual programming without ’VIDEO Plus+’
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press the TIMER s button on the remote control.
The programming mode selected last is marked.
c Select the line ’TIMER PROGRAMMING’ with the menu
buttons
P = or P ; and confirm with the P button.
TIMER
TIMER PROGRAMMING
VPS
DATE PROG. START PDC END LP
01 01 20:00 21:30
________________________________
TO STORE
PRESS
OK
d Select the entry field with the menu buttons Q or
P .
e Enter data with the menu buttons P = or P ; or with the
digit buttons 0-9 .
D Select recording at daily or weekly intervals in the field
’DATE’, with the SELECT button.
’MO-FR’: Recording to be made from Mondays to Fridays
inclusive.
’MO’: Weekly recordings on the same weekday.
D Use the
SELECT button to switch ’VPS/PDC’ on or off in
’START’.
D Use the
SELECT button to select the recording speed ’SP’
or ’LP’ in ’END’.
f Confirm with the OK button.
D The data has been stored in a TIMER block.
g To end, press the TIMER s button.
h Please note that you inserted a cassette without erase
protection. Switch off with the
STANDBY m button.
The programmed recording will only function when the
video recorder is switched off with the
STANDBY m but-
ton.
D If one or more of the TIMER blocks are occupied, ’
k ’
lights up in the display.
D If the end of the cassette is reached during a recording,
the video recorder automatically ejects the cassette. The
set switches off after a few minutes.
D If you forget to load a cassette, ’NO CASSETTE’ appears
on the TV screen and ’ k ’ lights up in the display.
D If you inserted a cassette with erase protection, the
cassette will be ejected.
D Programme numbers ’E1’ and ’E2’ are provided for
external recordings (via scart socket AV1 EXT1 or
AV2 EXT2 ).
D Programme number ’AUX’ is provided for audio record-
ings via sockets AUX IN L R .
13