Paxar TC6021OH - Manual (Page 60)

Problem Corrective Action
Printer will not print. Turn the power off and switch to a
fully charged handle.
Make sure the supplies are loaded
correctly.
Print has voids or is too
light. Make sure the supplies are loaded
correctly.
Make sure both sides of the platen
carrier are closed.
Turn the power off and switch to a
fully charged handle.
Clean the print head per
maintenance instructions.
Lock up occurs when you
enter FORMAT 100-109 Press
= 3
to clear the display.
Re-enter the correct format number.
Operator’s Handbook
52