Paxar TC6021OH - Manual (Page 16)

Loading and Removing Supplies
The following steps are for the initial loading and removing of
supplies (labels).
Loading Supplies
Check your management to see what supply size you need for
your printer. If you run out of supplies while printing, leave the
power on and skip Step 7.
1. Squeeze the side tabs on the dust cover, and rotate it open
until it locks (Figure 3). The hubs will retract in the locked
position.
2. Remove the seal from the roll of supplies, and remove the
first 10 tags or labels from the backing paper. Tear evenly
across the backing paper.
Hubs
Tear Here
Dust Cover
Side Tabs
Figure 3
Operator’s Handbook
8