Philips Universal-Fernbedienung - Manual (Page 10)

3. Smart controls
With the programmable SMART CONTROLS you can add up to eight special features in
each device mode. E.g Dolby Surround, EPG, Showview, Subtitle, etc.
For example: if you have installed an amplifier with Dolby Surround, you can control that
feature via a SMART CONTROL on the RU 885. A number of features has already been
pre-installed in the RU 885 memory.These features can be removed or replaced by
features of your own choice.
Add key
1 Press and hold SETUP until SETUP lights up in the display.
➜ DEV (first line)
➜ ADD (second line)
2 Use the Device Selection keys to select KEY.
➜ KEY (first line)
3 Use SMART CONTROLS to select ADD.
➜ ADD (second line)
4 Press SEND.
5 Use SMART CONTROLS to select the device to add a Smart Control function
to.
➜ AMP (for example - second line)
6 Press SEND to confirm.
7 Use SMART CONTROLS to select a Smart Control label from the library
(e.g. ADD Dolby).
8 Press SEND to confirm.
Notes: - The code for a function can be learned from another remote control or copied from
another device mode.
- With the library of specific Home Cinema and other labels you are able to label the
more exotic functions and store them as Smart Controls.
Remove key
1 Press and hold SETUP until SETUP lights up in the display.
➜ DEV (first line)
➜ ADD (second line)
2 Use the Device Selection keys to select KEY.
➜ KEY (first line)
3 Use SMART CONTROLS to select REMOVE.
➜ REMOVE (second line)
4 Press SEND to confirm.
5 Use SMART CONTROLS to select the device you want to remove a Smart
Control function from.
➜ AMP (for example - second line)
6 Press SEND to confirm.
7 Use SMART CONTROLS to select the Smart Control Key to be removed.
8 Press SEND to confirm.
Reset key(s)
1 Press and hold SETUP until SETUP lights up in the display.
➜ DEV (first line)
➜ ADD (second line)
2 Use the Device Selection keys select KEY.
➜ KEY (first line)
3 Use SMART CONTROLS to select RESET.
➜ RESET (second line)
4 Press SEND to confirm.
5 Use SMART CONTROLS to select the device of which you want to reset keys.
➜ TV (for example - second line)
6 Press SEND to confirm.
7 Pressing a key in the selected device mode will reset the key to the factory
settings.
(The keys below the part-line, Standby key, and the SMART CONTROLS can be
reset)
Note: Select a Smart Control with the SMART CONTROLS and press SEND to reset.
ENGLISH 10
XP SBC RU 885 27-09-2002 16:39 Pagina 10