Philips AC4083 - Manual (Page 12)

2 Lift the water bucket out of the appliance (1). Then remove the
water tank from the back of the appliance (2).
Note: You cannot remove the water tank without first removing the water
bucket.
3 Open the 4 clips and then remove the water tank lid.
4 Remove the packaging material from the water softener.
5 Put the water softener in the water tank.
6 Align the projections of the lid with the holes in the water tank and
put the lid on the water tank. Then close the four clips to lock the lid
(‘click’).
1
2
English
12