Pioneer S-EV500V - Manual (Page 41)

Using the timer 12
41
En
English
Français
Deutsch
Nederlands
Italiano
Español
Setting the record timer
You can set the timer to record from the LINE
source, or something off the radio. For
example, you might want to record a program
that is broadcast while you're at work. 1
1 Set up the tape deck.
Load a cassette tape, wind on past the leader
tape and set the reverse mode (see
Making tape
recordings on page 35 for more on this).
2 Select the source you want to record.
Press FM/AM ( TUNER on the front panel) or
LINE and prepare the source. 2
3 Press TIMER ( SHIFT +6) twice, use /
to select REC then press ENTER .
4 Use / to select EDIT then press
ENTER .
5 Set the switch-on time.
Use / to set the hour, then press ENTER .
Set the minute in the same way, pressing
ENTER when you’re done.
6 Set the switch-off time.
Set as above, pressing ENTER when done. The
REC indicator lights, then the switch-on,
switch-off times and the function (or
frequency, if you selected the tuner) are
confirmed in the display.
7 Switch the system into standby mode.
The record timer will not work if the system is
left on!
Turning the record timer on/off
If you have already set the record timer, you
can switch it on/off by selecting
REC ON or
REC OFF in step 4 above (press ENTER ).
Note
1 • During the actual recording, the volume is automatically set to minimum. After the recording has finished, the record timer
is canceled.
• You cannot have the record timer and the wake-up timer set at the same time.
2 For example, if you select the tuner, tune in the station you want to record (see Listening to the radio on page 21).
EV-500-1000.book 41 ページ ２００５年４月５日 火曜日 午後１２時３１分