12 using the timer, Setting the wake-up timer, Turning the wake-up timer on/off – Pioneer S-EV500V User Manual
Page 40: Setting the sleep timer, Using the timer, Using the timer 12, Chapter 12
Using the timer
12
40
En
Chapter 12
Using the timer
Important
• The clock must be set for the timers to work
properly (see
Setting the clock
on page 19).
Setting the wake-up timer
Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
1
1
Select the source you want played.
For example, press
FM/AM
to select the radio
as your source.
2
Prepare the source and set the volume.
For example, tune in the radio station you want
to wake up to. Adjust the volume as necessary.
3
Press
TIMER
(
SHIFT
+6) twice, use
/
to select WAKE-UP then press
ENTER
.
4
Use
/
to select EDIT then press
ENTER
.
5
Set the switch-on time.
Use
/
to set the hour, then press
ENTER
.
Set the minute in the same way, pressing
ENTER
when you’re done.
6
Set the switch-off time.
Set as above, pressing
ENTER
when done. The
WAKE-UP
indicator lights, and the switch-on,
switch-off times, the function (
DVD/CD
, etc.)
and volume are confirmed in the display.
7
Switch the system into standby mode.
The wake-up timer will not work if the system is
left on!
• You can check the timer settings in
standby by pressing
TIMER
(
SHIFT
+
6
)
twice.
Turning the wake-up timer on/off
If you have already set the wake-up timer, you
can switch it on/off by selecting
TIME ON
or
TIME OFF
in step 4 above (press
ENTER
).
Setting the sleep timer
The sleep timer switches off the system after a
specified time so you can fall asleep without
worrying about it.
2
1
Press
TIMER
(
SHIFT
+6) twice, use
/
to select SLEEP then press
ENTER
.
2
Use
/
(cursor up/down) to select a
switch-off time then press
ENTER
.
Choose between the following options:
•
AUTO
– Switches off automatically after
the currently playing CD or Video CD has
finished.
3
•
SLEEP 90
– Switches off after 90 minutes
•
SLEEP 60
– Switches off after an hour
•
SLEEP 30
– Switches off after 30 minutes
•
OFF
– Cancels the sleep timer
3
To check how much time is left, repeat
step 1.
The remaining time is displayed momentarily.
Note
1 You cannot have the wake-up timer and the record timer set at the same time.
2 • If you set the sleep timer while either the wake-up or recording timer is active, the earlier switch off time takes priority.
• The system will switch into standby if you change the input function during
AUTO sleep mode.
3
AUTO will not work with DVD/CDs in repeat play, cassette tapes, or Video CD/Super VCDs during PBC playback.
EV-500-1000.book 40 ページ ２００５年４月５日 火曜日 午後１２時３１分