Pioneer S-EV500V - Manual (Page 32)

Playing discs 07
32
En
• You can insert steps by just highlighting
the position where you want the new step
to appear and entering a title/chapter/track
number.
• To delete a step, highlight it and press
CLEAR .
5 To play the program list, press (play).
Program play remains active until you turn off
program play (see below), erase the program
list (see below), eject the disc or switch off.
Tip
• Use the following controls during program
play:
Other functions available from the
program menu
There are a number of other options in the
program menu in addition to Create/Edit.
• Playback Start – Starts playback of a
saved program list
• Playback Stop – Turns off program play,
but does not erase the program list
• Program Delete – Erases the program list
and turns off program play
Using the front panel display
Even though the OSD is available for CDs, the
front panel display provides information to
make a program list easily. If a disc is playing,
stop it first.
1 Press PROGRAM (SHIFT+1).
You’re prompted to enter a track for the first
step in the program list.
2 Use the number buttons to select a track,
then press ENTER .
If you make a mistake, press CLEAR to delete
the last (most recently) programmed track.
3 Repeat step 2 to build up a program list.
A program list can contain up to 24 steps.
4 To play the program list, press (play).
• Program play remains active until you
press (stop), clear the playlist (see tip
above), eject the disc or switch off the
player.
Searching a disc
You can search DVD discs by title or chapter
number, or by time; CDs and Video CD/Super
VCDs by track number or time; DivX video discs
by time.
1 Press HOME MENU and select ‘ Play
Mode ’.
2 Select ‘Search Mode’.
The search options that appear depend on the
kind of disc loaded.
3 Select a search mode.
• The disc must be playing in order to use
time search.
4 Use the number buttons to enter a title,
chapter or track number, or a time.
• For a time search, enter the number of
minutes and seconds into the currently
playing title (DVD/ DivX video) or track (CD/
Video CD/Super VCD) you want playback to
resume from. For example, press
4 , 5 , 0 , 0
to have playback start from 45 minutes into
the disc. For 1 hour, 20 minutes and 30
seconds, press
8 , 0 , 3 , 0 .
5 Press ENTER to start playback.
Button What it does
HOME
MENU Save the program list and exit
without starting playback.
Skip to the next step in the
program list.
EV-500-1000.book 32 ページ ２００５年４月５日 火曜日 午後１２時３１分