Pioneer S-EV500V - Manual (Page 36)

Using the tape deck 08
36
En
If you want to record the tracks in a different
order, or record only one track, use the
program play feature—see page 31 for how to
make a program list. Make sure playback is
stopped, then press
PROGRAM ( SHIFT + 1 )
before going to the next step.
4 Press ASES to start recording.
The ASES REC indicator lights, followed by a 4
second pause while the tape winds past the
leader, then recording starts.
Recording finishes automatically when the end
of the disc is reached, or the tape ends
(whichever comes first).
5 If you want to stop recording before the
end of the CD, press (stop).
Tip
• If you find that you’re getting noisy
recordings from an AM radio station, see
Optional system settings on page 48 to
change the beat cut mode.
• If you find that the auxiliary source signal is
too high (resulting in unpleasant distortion
in your recording), you may need to reduce
the signal level of the line source by
switching on the attenuator (see
Optional
system settings on page 48 to do this).
EV-500-1000.book 36 ページ ２００５年４月５日 火曜日 午後１２時３１分