Panasonic KX-TG2584S - Manual (Page 59)

“
59
For assistance, please call: 1-800-211-PANA(7262)
Cordless Telephone
FLASH Button (Cordless\Handset) (Base\Unit)
Pressing (FLASH/CALL\WAIT/PLAYBACK) or (FLASH/CALL\WAIT) allows you
to use special features of your host PBX such as transferring an extension
call or accessing special telephone services (optional) such as call waiting.
≥ Pressing (FLASH/CALL\WAIT/PLAYBACK) or (FLASH/CALL\WAIT) causes to
release following operations:
≥ —temporary tone dialing,
≥ —muting your conversation.
Selecting the flash time
(Cordless\Handset)
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)”. Your phone comes from the factory set to
“700 ms”.
Make sure the base unit and cordless handset are not being used.
1 Press (MUTE/FUNCTION) .
2 Scroll to “ Program ” by pressing (›) or (‹) .
3 Press (fl) ( Yes key).
4 Press (fl) ( Yes key) at “ Set flash time ”.
≥ The current setting is displayed.
5 Select the desired time by pressing (›) or
(‹) .
6 Press (fl) ( Save key).
≥ A beep sounds.
≥ To exit the programming mode, press
(OFF)
.
≥ You can exit the programming mode any time by pressing (OFF) .
≥ If the unit is connected via a PBX, PBX functions (transferring a call etc.) might
not work correctly. Consult your PBX supplier for the correct setting.
Flash time
:700ms
43 1 =Save
Flash time
:110ms
43 1 =Save
Flash time
:110ms
1 Save directory
Ringer volume
43 1 =Yes
LCD contrast
1 Program
43 1 =Yes
1 Set flash time
Set line mode
43 1 =Yes