Panasonic KX-TG2584S User Manual
Page 25
25
For assistance, please call: 1-800-211-PANA(7262)
Preparation
“
Flash Memory Message Backup
Messages are stored on a “flash memory” IC chip and will not be
affected by power failures. All messages are saved until you erase
them.
To check the recorded greeting message
1
Press
(FUNCTION/EDIT)
.
2
Scroll to “
Set answering
” by pressing
(›)
or
(‹)
.
3
Press
(fl)
(
Yes
key).
4
Scroll to “
Greeting check
” by pressing
(›)
or
(‹)
.
5
Press
(fl)
(
Yes
key).
≥
The recorded message will start to being played.
To erase the recorded greeting message
Press
(CLEAR/ERASE)
while the message is being played.
≥
The unit will answer a call with a pre-recorded greeting.
Pre-recorded greeting message
If you do not record a greeting message (p. 23), one of two messages will
be played when a call is received, depending on the caller’s recording
time (p. 26).
≥
A pre-recorded greeting will be played as follows:
∫
When the recording time is set to “1 minute”, “2 minutes” or
“3 minutes”:
“Hello, we are not available now. Please leave your name and phone number
after the beep. We will return your call.”
∫
When the recording time is set to “Greeting only”:
“Hello, we are not available now. Please call again. Thank you for your call.”
1
Date and time
Save DIRECT#
43
1
=Yes
LCD contrast
1
Set answering
43
1
=Yes
1
Greeting record
Greeting check
43
1
=Yes
Greeting record
1
Greeting check
43
1
=Yes
Greeting check
00-00