Panasonic KX-TG2584S - Manual (Page 16)

16
“ Settings
Line Mode (Cordless\Handset)
You can program the line mode using the cordless handset near the
base unit. If the line is connected to a low voltage system such as a PBX,
set to “B”. Otherwise the Call Waiting Caller ID Feature may not be used
(p. 58). Your phone comes from the factory set to “A”.
Make sure the base unit and cordless handset are not being used.
1 Press (MUTE/FUNCTION) .
2 Scroll to “ Program ” by pressing (›) or (‹) .
3 Press (fl) ( Yes key).
4 Scroll to “ Set line mode ” by pressing
(›) or (‹) .
5 Press (fl) ( Yes key).
6 Select “ B ” or “ A ” by pressing (›) or (‹) .
7 Press (fl) ( Save key).
≥ A beep sounds.
≥ To exit the programming mode, press
(OFF)
.
≥ You can exit the programming mode any time by pressing (OFF) .
1 Save directory
Ringer volume
43 1 =Yes
LCD contrast
1 Program
43 1 =Yes
1 Set flash time
Set line mode
43 1 =Yes
Set flash time
1 Set line mode
43 1 =Yes
Line mode
:A
43 1 =Save
Line mode
:B
43 1 =Save
Line mode
:B