beautypg.com

Modem test – Paradyne 6211 User Manual

Page 63

background image

3. Using the Web Interface

6210-A2-GB23-00

January 2005

3-35

Modem Test

The Modem Test is used to check whether your modem is properly connected to
the WAN Network by running OAM F4 and F5 end-to-end and segment tests. The
test may take a few seconds to complete. To perform the test, select your
connection from the list, select a Test Type, and click on the Test button.

Before running this test, make sure you have a valid DSL link; if the DSL link is not
connected, this test will always fail. Also, the DSLAM must support this feature.
Not all DSLAMs have OAM F4 and F5 support.

Figure 3-28. Modem Test