Paradyne 6211 - Manual (Page 59)

3. Using the Web Interface
6210-A2-GB23-00 January 2005 3-31
Remote Log
The remote log feature forwards all logged information to a remote PC. The type of
information forwarded to the remote PC depends upon the log level. Each log
message is assigned a severity level, which indicates how seriously the triggering
event affects modem functions. When you configure logging, you must specify a
severity level for each facility. Messages that belong to the facility and are rated at
that level or higher are logged to the destination.
For PPPoE and PPPoA connections, select Debug if you want to log the
connection information. This is helpful when trying to debug connection problems.
Verify that the Debug box is checked on the PPPoA or PPPoE Connection Setup
screen.
Table 3-1 defines the different severity levels.
To forward logging information, click on Tools and select Remote Log.
Table 3-1. Severity Levels
Severity Level Description
Panic System panic or other condition that causes the modem to stop
functioning.
Alert Conditions that require immediate correction, such as a corrupted
system database.
Citical Potentially critical conditions, such as hard drive errors.
Error Error conditions that generally have less serious consequences
than errors in the panic, alert, and critical levels.
Warning Conditions that warrant monitoring.
Notice Conditions that are not errors but might warrant special handling.
Info Events or non-error conditions of interest.
Debug Software debugging messages. Specify this level only if so directed
by your technical support representative.