Pentax Optio Digital Camera 43WR - Manual (Page 76)

74
5
Re
cor
d
ing
/Play
bac
k
You can set Voice messages from the Playback menu as well.
1
Press the MENU button in Playback mode.
The [Playback] menu is displayed.
2
Select [Playback Message] from the [Playback] menu.
3
Press the four-way controller (5).
The Voice Message Recording screen will be displayed.
4
Press the four-way controller (45)
to select the image to be used for
the Voice message.
Images with added Voice memos U are the
only images sent using the four-way
controller.
5
Press the OK button.
“A Voice message has been set” is displayed, the O button flashes, and
the camera goes into Standby mode.
You can play back a Voice message.
1
Press the O button.
The image will be displayed and the Voice memo will be played back.
Setting Voice Messages in the Playback menu
Playing Back a Voice Message
• Turn the camera on during Voice message settings to perform regular
operations. Turn the camera off again to return to Voice message
recording.
• To switch from Voice message recording to Capture mode, turn the
camera off and then turn it on again.
OK OK Exit Exit OK OK Exit MENU
100-0001
00_Optio43WR-E.book Page 74 Tuesday, April 6, 2004 4:40 PM