Pantech C530 - Manual (Page 16)

14
SIM card and battery
About your SIM card
When you subscribe to your network operator, you receive
a SIM (Subscriber Identity Module) card containing your
registration information, PIN code, etc.
Like a credit card, it should be kept secure and handled
carefully. Do not bend, scratch or expose it to moisture. Avoid
static electricity.
To avoid corrupting your SIM card’s memory, always switch off
your phone before removing or inserting your SIM card
About your battery
Your phone uses a Li-Ion battery. Make sure to use an
authorized battery and charger only. For more details, please
inquire at your nearest dealer.
note: Your phone is powered by a Lithium Ion (Li-Ion)
battery. This means that, unlike other forms of battery
technology, you can recharge your battery while some
charge remains without reducing your phone’s autonomy
due to the “battery memory effect” inherent in those
technologies.
Installing/removing SIM card and battery
1. Remove the battery cover from the
unit. To fit the battery cover, put it on
the guide rail and push up.
2. Insert the SIM card first into the slot.
The gold contacts of the SIM card
should go against the metal contacts
of the phone. After inserting the SIM
card, put the contacts of the battery
into the hole located at the right of the
unit (1) and press the left side (2) of
the battery until you hear the “click”.
3. To remove the battery pull the left
side of the battery to upwards (1) and
remove (2) the battery. After removing
the battery, remove the SIM card in
the arrow direction as shown.
note: Data will be loose if the SIM card
is removed while the phone is turned on.