Polaris 800 Switchback - Manual (Page 97)

95
MAINTENANCE
General Maintenance
Torque Stop
Your snowmobile is equipped
with an engine torque stop (1).
Periodically check the torque
stop clearance. With clutches in
proper alignment, the torque stop
clearance should be a minimum
of .010″ to a maximum of .030″
from the engine case (2). Adjust
if necessary, and lock the jam
nut.
Tool Kit
A tool kit is included with each
machine for emergency and
routine maintenance. Always keep
the tool kit with the snowmobile.
Your tool kit will contain only the
tools applicable to your model.
1. Emergency Start Strap
(manual start models)
2. Phillips Screwdriver
3. Tubular Socket
4. Tubular Socket Handle
5. Wrench
6. Flat Screwdriver
7. Shielded Screwdriver (models
with Indy Select shocks)
8. Box End Wrench
If necessary, a replacement tool kit may be purchased from your Polaris
dealer.
Chain Tension
Maintain the proper chain tension as outlined on page 84.
Oil Level
Maintain the oil level between the safe marks as indicated on the oil
bottle (see page 57).
2 1
1
2
3
4
5
7
8
6