Polaris 800 Switchback - Manual (Page 44)

42
THE PERFECT FIT
Accessories
Wear Strips
To avoid excessive tunnel or cooler damage, wear strips must be
installed whenever track studding is used. See your dealer for more
information.
Wear strips are designed for a specific stud length. See your dealer’s
studding chart for recommended traction accessories.
Components as viewed from the rear of the track:
1. Top of tunnel
2. Wear strip
3. Track
4. Wear strip mounting holes
Never add shims to the wear strip. Track damage will result due
to lack of clearance between upper carrier wheels and track.
CAUTION
4
1
2
3
Whenever wear strips are relocated, be sure there’s adequate
stud clearance to the heat exchangers. Lack of clearance may
result in damage to heat exchangers.
CAUTION