Philips CED228 - Manual (Page 28)

29
2
Open the panel, then push the right side
panel toward the left side to disengage it
from the chassis.
3
Take off the panel and store it in the
supplied carry case to protect it from dirt
or damage.
Reset
You can reset the unit to its default setting.
1
Detach the front panel .
2
Press RESET by using a ball-point pen or
a similar tool.
All settings are erased except clock.
»
7 Others
Listen to other devices
You can connect an external sound device to
the unit.
1
Connect the external sound device to the
unit by using a 3.5 mm plug.
2
Press SOURCE repeatedly until [AUX] is
displayed.
3
Operate the device (refer to the
instructions supplied with the device).
Detach the front panel
The front panel can be detached and taken
with you to deter theft.
Note
Before installing the unit, detach the front •
panel.
1
Press to release the panel.
EN
English