Philips CED228 - Manual (Page 11)

12
Connector Connect to
7 Gray and
gray/black
wires Right speaker (Front)
8 Purple and
purple/black
wires Right speaker (Rear)
3
Connect the supplied standard connector
to the unit.
4
Do the other connections, if applicable.
CAMERA IN
2
Check the car’s wiring carefully, then
connect them to the standard connector.
Connector Connect to
1 Black wire A metal surface of the
car
First connect the black
ground (earth) lead, then
connect the yellow and
red power supply leads.
2 Yellow wire The +12V car battery
which is live at all times.
3 Orange/
white wire Illumination switch
4 Red wire The +12V power terminal
which is live in the
accessory (ACC) position
of the ignition switch
If there is no accessory
position, connect to the
+12V car battery terminal
that is always live. Be
sure to connect the black
ground (earth) lead to a
metal surface of the car
fi rst.
5 Green and
green/black
wires Left speaker (Rear)
6 White and
white/black
wires Left speaker (Front)
1
2
3
4
5
6
7
8
EN