Philips CED228 User Manual
Page 24
25
2
Press
or
to select a preset EQ.
3
You can also adjust below settings:
•
[BAS]bass range: -7 to +7
•
[MID]middle range: -7 to +7.
•
[TRE]treble range: -7 to +7
•
[LPF] low pass fi lter range: 60, 80,
100, 200.
•
[MPF]middle pass fi lter range: 500,
1K, 1.5K, 2.5K.
•
[HPF]high pass fi lter range:10K,
12.5K, 15K, 17.5K.
4
Press
to exit.
Other sound settings
You can also adjust the front and rear speaker
balance, the left and right speaker balance, and
subwoofer settings.
1
Press
EQ/Audio for 3 seconds.
The following options are displayed:
»
2
Press
or repeatedly to select the
item to be adjusted:
•
[BAL] balance range: 7Lto 7R. (L =
left speaker, R = right speaker)
•
[FAD]fader range: 7R to 7F. (R =
rear speaker, F = front speaker)
3
Press
or
to change value, then
press .
You can also turn
•
to select a value.
4
Press
to exit.
2
Press
or repeatedly to select the
item to be adjusted:
•
[BAL] balance range: 10Lto 10R. (L
= left speaker, R = right speaker)
•
[FAD]fader range: 10R to 10F. (R =
rear speaker, F = front speaker)
•
[SUB] subwoofer : ON, OFF
•
[SUB VOL] subwoofer volume: 0 to 20
3
Press
or
to change value, then
press .
You can also turn
•
to select a value.
4
Press
to exit.
Select preset equalizer
You can select preset equalizer:
•
[User]
•
[Techno]
•
[Rock]
•
[Classic]
•
[Jazz]
•
[Optimal]
•
[Flat]
•
[Pop]
Note
Only when you selected the
•
[USER] equalizer,
the Bass/Middle/Treble sound value adjusted
can be retained.
1
Press
EQ/Audio.
The current Equalizer setting is displayed.
»
EN
English