Premier Mounts PP-FCTA-QL - Manual (Page 10)

Page 10 Installation Instructions
PP-FCTA-QL
Technical Specifi cations
All measurements are in inches [mm].
Securing Pipe to the PP-FCTA-QL
Step 1. Secure the 1½” (NPT) pipe to the ceiling plate and tighten by using one (1) M5 x 16 Phillips head screw (supplied)
to the plate.
1-1/2” Pipe
M5 x 16mm Set
Screw
1-1/2” Pipe
Ceiling Plate
Assembly
Tiles
T-Bar Frame Rails
The M5 x 16 Phillip head screw must be used to stabilize the 1½” (NPT) pipe.