Philips DCM109 - Manual (Page 21)

21
Tip
Alarm timer is not available in MP3 LINK •
mode.
If the DISC/USB/iPod/iPhone source is
•
selected but no disc inserted or no USB/iPod/
iPhone is connected, the system will switch to
the tuner source automatically.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
When sleep timer is activated, the
»
display shows .
2
Press SLEEP/TIMER repeatedly until
[OFF] is displayed.
When sleep timer is deactivated,
»
disappears on the display.
Listen to an audio player
You can listen to an MP3 player through this
unit.
1
Press MP3 LINK to select MP3 LINK
source.
2
Connect the supplied MP3 link cable to:
• MP3 LINK jack (3.5 mm) on the unit
the headphone jack on an external
•
device
3
Start to play the device (see the device
user manual).
10 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, TUNER, USB or iPod/iPhone source can
be activated to play at a preset time.
1
Ensure that you have set the clock
correctly.
2
Press and hold SLEEP/TIMER.
3
Press DISC , TUN, USB or iPod/iPhone
to select a source.
4
Press SLEEP/TIMER to confirm.
The hour digits are displayed and begin
»
to blink.
5
Press / to set the hour.
6
Press SLEEP/TIMER to confirm.
The minute digits are displayed and
»
begin to blink.
7
Press / to set the minute.
8
Press SLEEP/TIMER to confirm.
The timer is set and activated.
»
Note
If the DISC/USB/iPod/iPhone source is •
selected but no disc inserted or no USB/ iPod/
iPhone is connected, the system will switch to
the tuner source automatically.
Activate and deactivate alarm timer
1
In the standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate timer.
If timer is activated, the display shows
»
.
If timer is deactivated,
»
disappears on
the display.
English
EN