Philips DCM109 - Manual (Page 15)

15
The system switches to the designated
»
source mode or standby mode.
Turn on
1
Press POWER.
The unit switches to the last selected
»
source.
Switch to standby
1
Press POWER to switch the unit to
standby mode.
The backlight on the display panel is
»
dimmed.
The clock (if set) appears on the
»
display panel.
Set clock
1
Press and hold CLOCK/DISPLAY to
activate the clock setting mode.
The 12 hour or 24 hour format is
»
displayed.
2
Press PROG repeatedly to select 12 hour
or 24 hour format.
3
Press CLOCK/DISPLAY to confirm.
The hour digits are displayed and begin
»
to blink.
4
Press / to set the hour.
5
Press CLOCK/DISPLAY to confirm.
The minute digits are displayed and
»
begin to blink.
6
Press / to set the minute.
7
Press CLOCK/DISPLAY to confirm.
Tip
To view the clock during play, press • CLOCK/
DISPLAY repeatedly until the clock is
displayed.
English
EN