Network, Wired lan settings, Default network settings – Panasonic TQBH0215-1 User Manual
Page 6: Network setting of the projector, Cont.), Menu’s operating guidance
6
Network setting of the projector
(cont.)
NETWORK
Wired LAN settings
You can make detailed wired LAN settings.
Select [WIRED LAN] in the NETWORK menu and press the [ENTER] button.
1
WIRED DETAILED SETUP
OK
CANCEL
CANCEL
SELECT
DHCP
IP ADDRESS
SUBNETMASK
DEFAULT GATEWAY
192.168. 10.100
OFF
192.168. 10. 1
255.255.255. 0
DHCP
ON:
If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be
acquired.
OFF: If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP
ADDRESS
], [SUBNETMASK
] and [DEFAULT GATEWAY
].
Select each item with the [▲▼] buttons and change the settings following the
2
menu’s Operating guidance.
Select [OK] with the [▲▼] buttons and press the [ENTER] button.
3
Default network settings
The following settings are set before the projector leaves the factory.
DHCP
OFF
IP ADDRESS
192.168.10.100
SUBNETMASK
255.255.255.0
DEFAULT GATEWAY
192.168.10.1