Panasonic TQBH0215-1 - Manual (Page 3)

3
Request Regarding Security
When using this product, security breaches of the type described below are conceivable.
Leakage of your private information via this product •
Illegal operation of this product by a malicious third-party •
Harm to or cessation of operation of this product by a malicious third-party •
Be sure to implement sufficient security measures.
Set passwords, and limit the users that are permitted login access. •
Make sure the password is as hard to guess as possible. •
Change the password periodically. •
Panasonic Corporation and its affiliated companies never directly ask customers for their password. •
Do not give out your password even if directly asked by a third-party representing themselves as Panasonic Corporation.
Always use on a network that has safety protection such as a firewall implemented. •
What you can do
(See page 9)
The following operations are possible when using WebBrowser.
Setting and adjusting the projector •
Displaying the projector status •
Setting for message transmission •
(See page 17)
Compatible with PJLink Class 1. The following operations can be performed from a computer when PJLink protocol is used.
Setting the projector •
Querying the projector status •
(Refer to “SERIAL TERMINAL” in “Technical Information” of the Basic Manual.)
You can control the projector from a computer, using the control commands of the serial terminals.
If you use “WEB control”, “PJLink” or “Command control”, turn [ON] the [NETWORK CONTROL] in the NETWORK menu for the
projector. (See page 7)