Philips 9P6044C1 - Manual (Page 8)

P
ICTURE
M
ENU
C
ONTROLS
(
CONTINUED
)
STOP ■
REW
ᮤᮤ
FF
ᮣᮣ
PLAY ᮣ REC•/ STATUS
VOL CH
1 2 3
4 5 6
7 8 9
0
ON/OFF
TV/VCR
VCR ACC TV
SWAP FREEZE POS
SIZE
ENTER
MENU
M
CLEAR
؀ ؁
SURF MUTE
PAUSE II
SLEEP
SMART
POWER
M O D E
LIGHT
2 TUNER PIP
B ᮤ ᮤ A
INFO
GUIDE
VCR
Plus +
MAIN MENU
PICTURE
FEATURES
SOUND
HELP
EXIT
PICTURE MENU
FLESH CORRECTION
EXIT
2 OF 2
MORE...
CONVERGENCE
PICTURE MENU
SHARP
PICTURE
CLEARVIEW
EXIT
1 OF 2
COLOR TINT
MORE...
BRIGHT
Use the keys to merge the
RED fringe into the WHITE
cross. Press "M" to Continue.
Press "M" to Continue
- or -
Press " " to Return
If there is RED or BLUE
fringe on the WHITE cross,
use this adjustment to
improve the picture.
2
3
1
1
4 2
3
1ST TIME SETUP
RED/BLUE CONVERGENCE
C onvergence is the correct
lining up of the red and blue
light paths on the TV screen.
NOTE: If no color fringing (see
Smart Help) shows, then no
Convergence adjustments are
necessary for your TV.
Select CONVERGENCE
control.
With PICTURE MENU (2 of 2) on
screen, move the RED highlight
with the MENU (M) buttons.
Then press the MENU button.
If there is RED or BLUE color
fringing on the White cross, press
the MENU button to continue.
Press the MENU buttons
to move the red or blue cross
directly over the white cross on the
TV screen.
The red or blue cross is properly
adjusted when it is completely
merged with the white cross. (No
color appears around the edge of
the white cross).
Press the STATUS button to
clear the screen when convergence
adjustments are complete.
1
2
3
STOP
S
MART
H
ELP
Remember. Convergence
has been set at the factory for
best viewing, but if one or more of
the (red or blue) colors appear
around the edges of objects (color
fringing) follow the steps given in
this section.
BEGIN
4
8
NOTE: Adjustments for “Multi-Point” on-
screen color fringing can also be made as part
of the TV’s Convergence control system.
Follow the TV’s on-screen menu directions to
select individual screen areas that can be
readjusted and set for varying red/blue color
fringing conditions. These multi-point settings
can then be “Saved” to memory for the
specific areas of the TV screen (or Factory
Settings for convergence can be recalled and
put back into place for use).
Press "M" to Adjust or
Press "STATUS" to Continue
Use the keys to adjust
Press "M" to Save
Press " " to Undo
Press " " to
recall Factory Settings
MULTI-POINT CONVERGENCE