Panasonic KX-FLB756AL - Manual (Page 20)

20
Setup
Connections !
(For Australian users)
(For New Zealand users)
Telephone
line cord
To the single
telephone line
jack
To the power outlet
(220–240 V, 50/60 Hz)
Power cord
Handset cord
Longer,
uncoiled end
1 Connect the handset cord.
● The jack on the longer, uncoiled end of the handset cord should be connected to
the unit.
2 Connect the telephone line cord.
3 Connect the power cord.
● When the power is turned on for the first time, the unit will print some basic information.
Note:
● You can connect an answering machine or extension telephone to this unit (p. 46–48).
● When the power is turned on and the display shows the following, unlock the shipping lock (p. 15).
RELEASE
SHIPPING LOCK
CARRIAGE ERROR
Caution:
● ● When you operate this product, the power outlet should be near the product and easily
accessible.
● Use the telephone line cord included in this unit.
● Do not extend the telephone line cord.
To use the fax machine with a computer on the same line
● We recommend you use separate wall jacks for the fax machine and the computer.
● Set the fax machine to TEL mode (p. 44).
● The device which has the shortest ring setting will answer the call first.
● If the computer provides a port for a telephone line, connect the fax machine to this port on the computer.
/
This model is designed to be used in Australia and New Zealand. TO USE IN NEW ZEALAND,
CHANGE THE LOCATION SETTING (feature #74 on page 66).