Tape cutter – Panduit LS7 User Manual
Page 18
15
TAPE CUTTER
With use, the tape cutter may become covered with adhesive, making it difficult to cut the
tape. If t he tape cannot be cut correctl y, clean the tape cutter blades as explained below.
☞
To avoid inj uries, be ext remely careful not touch t he cutter blades with bare hands.
To clean the tape cutter blades:
1
Turn off the m achine.
2
Remove the back cover, and then remove the tape cassette if one is installed. The t ape
cutter i s located near the t ape exit slot.
3
Using a cotton swab dipped in isopropyl (rubbi ng) alcohol, wipe the tape cutter bl ades
with an up-and-down motion.
Be careful not to touch the cutter blades with bare hands.
T ape cutter blade
Cotton swab
Tape c utter blade