beautypg.com

Ptx_setup option – Printronix T3306 User Manual

Page 84

background image

3–40

Configuring the Printer

When enabled, the hex dump mode translates all host interface data to its
hexadecimal equivalent, then prints the hex code and its printable symbol, if one
exists.

All characters printed after entering the hex dump mode (including any in the
input buffer are printed in two forms: as a two-symbol hexadecimal code and as
its printable symbol, if any. A nonprintable code is printed as a period (.) symbol.
Up to 16 characters can be printed per line. No control codes will be acted upon
by the printer while in hex dump mode. (See

Figure 3–15

.)

The 16 characters are formatted so that the 16 printable symbols are printed in
columns 1 through 16. Columns 17 and 18 are blank. Columns 18 and 19 contain
the hexadecimal code for the first character, followed by two blanks. The
hexadecimal code for the 16th character is printed in columns 79 and 80.

Subsequent printing observes the current setting for skip-over perforation, form
length and top-of-form position parameters

Cancel the hex dump mode (while off line) by disabling it from the control panel.
The paper then may be advanced to the next top-of-form.

If a fault occurs while printing a hex dump, the printer reverts to the normal fault
state. When the fault is cleared, the printer resumes printing the hex dump (either
a partial line with a form feed, or nothing at all). Top-of-form remains unaffected.

PTX_SETUP Option

This option selects the special function control code for the PTX_SETUP
command and functions. The legal values are 1h – FF, which represent the ASCII
code (in hexadecimal) of the character used as the SFCC for the PTX_SETUP
command. The default value is 21h, which corresponds to the “!” character.

The Impact Print

54

68

65

20

49

6D

70

61

63

74

20

50

72

69

6E

74

er Emulation pri

65

72

20

45

6D

75

6C

61

74

69

6F

6E

20

70

72

69

nts in one–up, t

6E

74

73

20

69

6E

20

6F

6E

65

2D

75

70

2C

20

74

wo–up, and four–

77

6F

2D

75

70

2C

20

61

6E

64

20

66

6F

75

72

2D

up page windows,

75

70

20

70

61

67

65

20

77

69

6E

64

6F

77

73

2C

Figure 3–15. Example of Hex Dump

This manual is related to the following products: